Abs Hydraulic Modulator/Ecm; Removal - Triumph 2012 Tiger 800 Service Manual

ABS Hydraulic Modulator/ ECM

Removal

Before starting work, ensure the motorcycle is stabilised
and adequately supported. This will help prevent it from
falling and causing injury to the operator or damage to
the motorcycle.
1. Remove the rider's seat (see page
Disconnect the battery, negative (black> lead first.
2 .
3 . Remove the fuel tank <see page 10-91).
4. Remove the airbox (see page 10-98).
5. Remove the upper ABS modulator fixing.
6. Remove the four fixings and remove the front seat
bridge.
1. Front seat bridge
2. ABS modulator upper fixing
To prevent body damage, do not spill brake fluid onto
any area of the bodywork or wheels.
Z Drain the brake fluid from the front and rear master
cylinders (for front brake master cylinder see
page and for rear brake master cylinder see
14-12,
page
14-23).
16-73).
SeiVice Manual Tiger 800 and Tiger 800XC
-
Remove the three fixings and detach the rear brake
8.
hose P-clips from the rear swinging arm and ABS
modulator bracket
mudguard).
cgyl
1. P-clips
2. Fixings
9. Detach the ABS wheel speed sensor cable from the
rear brake hose.
Disconnect the ABS modulator mu ltiplug <See
10.
page
14-53).
Brakes
<located under the rear
14.39