Triumph 2012 Tiger 800 Service Manual page 104

Clutch
1 1. Refit the clutch pul l-rod.
12. Refit the clutch pressure plate together with the
springs and bolts. Tighten the bolts to
Note:
The pull-rod should be free to move in and
•
out and also it should be free to turn.
1 3 . Clean a n d refit the clutch cover incorporating a new
gasket. Tighten the clutch cover bolts to
4.12
10 Nm.
9
Nm.
Setvice Manual Tiger 800 and Tiger 800XC
-
14. Refit the clutch cable to the actuating arm at the
clutch end <see page 4-5>.
1 5 . Set the clutch adjustment (see page 4-5>.
16. Reconnect the battery positive (red) lead first.
1 Z Refit the rider's seat <see page
16- 13).