Diagnostic Trouble Codes - Triumph 2012 Tiger 800 Service Manual

Diagnostic Trouble Codes

Dependant on the DTC stored, the AB$ ECM will act in one of two ways:
a) I n hibit ABS operation immed iately, irrespective of the ABS operating mode;
or
b) Al low the ABS operation to complete before inhibiting the ABS.
Once the ABS ECM has inhibited ABS function, the ECM will act i n one of three ways :
a> Allow the ABS to resume operation if the fau lt clears;
or
b) Allow ABS operation after an ign ition cycle if the fault clea rs;
or
c)
I n hibit the ABS function until the fault is rectified and the DTC erased.
The AB$ system will act on the DTC stored according to the tables on the following pages:
Fault Description
Front Wheel Sensor Open
Circu it/Short Circuit
Front Wheel Sensor Abnormal
Input/Losing Contact
Rear Wheel Sensor Open
Circu it/Short Circuit
Rear Wheel Sensor Abnormal
Input/Losing Contact
Front Wheel Pulser Gear
Missing Teeth
Rear Wheel Puis er Gear
Missing Teeth
Front Wheel I n put Solenoid
Open/Short Circuit
Front Wheel Output Solenoid
Open/Short Circuit
ABS warning ABS
light operation
illuminated inhibited
when fault is when fault is
logged logged
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes
Yes
Yes Yes
Yes
Service Manual Tiger 800 and' Tiger SOOXC
-
ABS will resume operation
ABS continues
operate if fault clears
is to
when fault is
logged
when
<Only
ABS is Active.
When ABS is no
longer active,
operation is
inhibited)
N o
Yes, if after ign ition cycle, no
Yes
fault is detected. DTC
stored
N o
Yes, if after ign ition cycle, no
Yes
fa ult is detected. DTC remains
stored
Yes Yes, if after ign ition cycle, no
fault is detected for 1 second
and speed exceeds 30 km/h.
DTC remains stored
Yes Yes, if after ignition cycle, no
fa ult is detected for 1 second
and speed exceeds 30 km/h.
DTC remains stored
N o
N o
Yes
Bra kes
o
r
emains
14.51