Rear Direction Indicator; Installation; Front Direction Indicator; Removal - Triumph 2012 Tiger 800 Service Manual

Rear Direction I ndicator

Removal

1 . Remove the seat <see page 16-13).
2 . Disconnect t h e battery, negative <black) lead first.
3 . Remove t h e rear rack <see'
4. Release the fixing secu ring the d i rection indicator to
the rear mudguard
indicator.
5. Disconnect the d i rection
connectors.
1.
Direction indicator
2. Fixing

Installation

1. I nstallation is the reverse of the remova l procedu re,
noting the fol lowing.
Note:
•
Tighten the direction indicator fixing to
3 Nm.
•
Tighten t!1e rear rack fixings to 3 Nm.
•
Reconnect the battery, positive <red> lead
first.
p a g e 76-20>.
and detach the d i rection
indicator electrical
Service Manual Tiger 800 and Tiger 800XC
-
Front Direction I ndicator
Removal
1.
Remove the rider's seat <see page 76-13>.
2.
Disconnect the battery, negative (black) lead first.
3 . Remove the u pper rad iator panel (see page 76-14>.
4. Release the fixing secu ring the d irection indicator to
the u pper radiator panel and remove the u nit.
1.
U pper radiator panel
2. Direction indicator <right hand shown>
3. Direction indicator fixing
4. Nut
Installation
1.
I n stal lation is the reverse of the removal p rocedu re,
noting the following.
Note:
•
Tighten the direction indicator fixing to
3 Nm.
•
Reconnect the battery, positive (red> lead
first.
Electrical
4
I
/@;
17.17