Table of Contents
Advertisement
General Information
Ignition System Safety Precautions
The ignition system produces extremely high voltages.
Do not touch any part of the ignition system or any
cables while the engine is running.
An electric shock caused by contact with the ignition
system may lead to illness, injury or death.
Wearers
of
surgically
implanted
devices should not be in close proximity to ignition
circuits and or diagnostic equipment.
The ignition system and any diagnostic equipment may
interrupt the normal operation of such devices causing
illness or death.
Dangerous Substances
Many liquids and other substances used in motor
vehicles
are
poisonous
circumstances be consumed and should, as far as
possible, be kept from contact with the skin. These
substances
among
others include acid,
asbestos,
brake
fluid,
fuel,
adhesives. Always pay close attention to the instructions
printed on container labels and obey the instructions
contained within. These instructions are included for
your safety and well-being.
NEVER DISREGAR D T H ES E I N ST R UCT IONS!
Third Party Products
Many propriety products, such as chemicals, solvents
and cleaning agents, will cause damage to components
if used incorrectly or inappropriately. Always follow the
manufacturer's instructions printed
container's labels and obey the instructions given. These
instructions are included for your safety and well-being.
Damage to the motorcycle components caused by the
incorrect or inappropriate use of chemicals, solvents and
cleaning agents may reduce the components efficiency,
resulting in loss of motorcycle control and an accident.
1.4
heart
pacemaker
and
should
under
no
anti-freeze,
lubricants,
and
various
on
the product
SeiVice Manual - Tiger
Fluoroelastomers
Fluoroelastomer material is used in the manufacture of
various seals in Triumph motorcycles.
In fire conditions involving temperatures greater than
315°C this material will decompose and can then be
potentially
hazardous.
Highly
decomposition products, including hydrogen fluoride,
carbonyl
fluoride,
fluorinated
monoxide can be generated and will be present in
fumes from fires.
In the presence of any water or humidity hydrogen
fluoride may dissolve to form extremely corrosive liquid
hydrofluoric acid.
If such conditions exist, do not touch the material and
avoid all skin contact.
Skin contact with liquid or
decomposition
residues
penetrating burns leading to permanent, irreversible
skin and tissue damage.
Oils
The engine and bevel box oils may be hot to the touch.
Contact with hot oil may cause the skin to be scalded or
burned.
Prolonged or repeated contact with engine oil can lead
to skin dryness, irritation and dermatitis. In addition used
engine oil contains potentially harmful contaminants
which can cause cancer. Wear suitable clothing and
avoid skin contact.
800
800XC
and Tiger
toxic
and
corrosive
olefins
and
carbon
can
cause
painful
and
Advertisement
Chapters
Table of Contents
