Table of Contents
Advertisement
General Information
Caution
Stop the engine immediately if the
high coolant temperature warning
light illuminates. Do not restart the
engine
until
the
rectified.
Severe engine damage will result from
running the engine when the high
coolant temperature warning light is
illuminated.
Immobiliser/Alarm Indicator Light
This Triumph motorcycle is
equipped with an engine immobilizer
which is activated when the ignition
switch is turned to the OFF position.
Without Alarm Equipped
When the ignition switch is turned to
the OFF position, the immobilizer/alarm
light will flash on and off for 24 hours to
show that the engine immobilizer is on.
When the ignition switch is turned to
the ON position the immobilizer and the
indicator light will be off.
If the indicator light remains on it
indicates that the immobilizer has a
malfunction that requires investigation.
Contact an authorized Triumph dealer
as soon as possible to have the fault
checked and rectified.
With Alarm Equipped
The immobilizer/alarm light will only
illuminate
when
described
in
the
accessory alarm instructions are met.
30
fault
has
been
the
conditions
genuine
Triumph
ABS (Anti-Lock Brake System)
Warning Light
The
ABS
illuminates to show that the ABS
function is not available. Illumination is
normal after engine start up, and until
the motorcycle first reaches a speed
exceeding 6 mph (10 km/h). Unless there
is a fault, it should not illuminate again
until the engine is restarted.
If the warning light becomes illuminated
at any other time while riding it
indicates
that
malfunction that requires investigation.
Warning
If the ABS is not functioning, the brake
system will continue to function as a
non-ABS braking system.
Do not continue to ride for longer than
is necessary with the indicator light
illuminated.
Contact an authorized Triumph dealer
as soon as possible to have the fault
checked and rectified. In this situation
braking too hard will cause the wheels
to lock resulting in loss of motorcycle
control and an accident.
Traction Control (TC) Indicator Light
The TC indicator light is used
to indicate that the traction control
system is active and is working to limit
rear wheel slip during periods of hard
acceleration or under wet or slippery
road conditions.
warning
light
the
ABS
has
a
Advertisement
Chapters
Table of Contents
