Front Brake Pads; Removal - Triumph 2012 Tiger 800 Service Manual

Brakes

Front Brake Pads

Removal

Before starting work, ensure the motorcycle is stabilised
and adequately supported. This will hel p prevent it from
falling and causing injury to the operator or damage to
the motorcycle.
1. Unscrew the pad retaining pin plug from the caliper.
1. Pad retaining pin plug
2. Loosen the pad retaining pin.
Do not allow the calipers to hang on the brake hoses as
this may damage the hoses and could lead to loss of
motorcycle control and an accident.
14.14
SeiVice Manual Tiger 800 and Tiger 800XC
-
3 . Slacken a n d remove the caliper mounting bolts and
slide the caliper off the disc.
Q
cgyz
1. Caliper fixings
4. Remove the pad retaining pin and remove the pads
from the caliper. Take care not to lose the pad
retainer from the mounting bracket or the anti-rattle
spring from the caliper body.
ceqv
1. Caliper
2. Brake pad
3. Heat isolation pad
4. Anti-rattle spring
5. Pad retainer
6. Pad retaining pin
7. Pad retaining pin plug