Table of Contents
Advertisement
Fuel System/Engine Management
Reconnection of ECM connectors
Note:
•
Two
different
connectors are used in the ECM, which
ensures correct connection is always made.
The connectors on the ECM are coloured
black
and
grey,
identical coloured . connectors on the main
harness.
Damage to the connector pins may result if an attempt
to fit the connectors incorrectly is made.
1. ECM grey connector
2. ECM black connector
10.40
coloured
and
shaped
and
correspond
with
Service Manual
Tiger 800 and Tiger 800XC
-
1.
Fit the first connector into its socket a nd, whilst
holding the connector in place, insert it ful ly into the
ECM until the locking device retains it.
2.
Repeat the above for the second connector.
Further Diagnosis
The tables that follow wil l, if used correctly, help to
pinpoint a fa ult in the system once a diagnostic trouble
code has been stored.
Advertisement
Chapters
Table of Contents
