Removal; Installation; Beak - Tiger 800 Xc Only - Triumph 2012 Tiger 800 Service Manual

Table of Contents

Advertisement

Frame and Bodywork
8.
Remove the two fixi ngs and remove the rad iator infill
panel.
c gxt
1.
Radiator infill panel
2. Fixings
9.
Collect the radiator guard.
Tiger SOOXC only:

Installation

1 .
Refit t h e rad iator guard.
Tiger SOOXC only:
2 .
Align t h e rad iator i n f i l l panel t o t h e rad iator and
secure with two new fixings. Tighten to
3.
Right hand radiator infill panel only:
clutch cable and expa nsion tan k vent hose cli p to the
rear of the rad iator infill panel.
4.
If accessory fog lamps a re fitted, reposition the fog
lamp wiring and secu re with new ca ble ties. Attach
the relay to the tang.
5 .
Left hand radiator infill panel only:
heated g rips a re fitted, reposition the heated grip
wiring and secu re with new cable ties. Attach the
relay to the tang.
6.
Refit the u pper rad iator panel (see page 16- 14).
Z
Refit the lower radiator panel <see page 16- 14).
8.
Recon nect the battery, positive <red) lead first.
9 .
Refit t h e rider's seat (see p a g e 16- 13>.
16.16
6 Nm.
Refit the
If accessory
SeiVice Manual
Tiger 800 and Tiger 800XC
-
Beak - Tiger SOOXC only

Removal

1 .
Remove t h e fou r fixings and remove t h e beak in a n
u pwards direction.
1.
Beak
2. Fixings
Installation
'i.
I n stallation is t h e reverse of remova l noting the
fol lowin g :
Note:
Tighten the fixings to 3 Nm.
·

Advertisement

Table of Contents
loading

Table of Contents