Front Suspension
6.
Slacken the top yoke clamp bolts.
Care must be taken when removing the forks, to ensure
that the outer surfaces do not become scratched.
Z
Slacken the bottom yoke clam p bolts.
1. Bottom yoke clamp bolts
8.
Using a downward, twisting action, withdraw the
forks from between the yokes.
13.6
SeiVice Manual
Tiger 800 and Tiger 800XC
-
Installation
1.
Position the forks within the yokes so that the lip of
the outer tube, not the top cap, is 4 mm above the
upper surface of the top yoke.
1. Outer tube
2. Top cap
3. Top yoke
2.
Tighten the bottom yoke clam p bolts to·
3 .
Tighten the top yoke clam p bolts t o
Note:
•
If the forks have been dismantled, tighten
the fork top caps to 3 5 Nm, and if removed,
the lower damper cylinder bolt to 2 0 Nm.
4.
Refit the front mudguard <see page 16-21 Tiger 800
for and 16-21 for Tiger 800XO.
20 Nm.
2 0 Nm.