Table of Contents
Advertisement
ABS (Anti-Lock Brake System)
Warning Light
The
ABS
illuminates to show that the ABS
function is not available. Illumination is
normal after engine start up, and until
the motorcycle first reaches a speed
exceeding 6 mph (10 km/h). Unless there
is a fault, it should not illuminate again
until the engine is restarted.
If the warning light becomes illuminated
at any other time while riding it
indicates
that
malfunction that requires investigation.
Warning
If the ABS is not functioning, the brake
system will continue to function as a
non-ABS
braking
continue to ride for longer than is
necessary with the indicator light
illuminated.
Contact
Triumph dealer as soon as possible to
have the fault checked and rectified. In
this situation braking too hard will
cause the wheels to lock resulting in
loss of motorcycle control and an
accident.
warning
light
the
ABS
has
system.
Do
not
an
authorized
General Information
Traction Control (TC) Indicator Light
The TC indicator light is used to
indicate
that
system is active and is working to limit
rear wheel slip during periods of hard
acceleration or under wet or slippery
road conditions.
If the traction control is not functioning,
care must be taken when accelerating
a
and cornering on wet/slippery road
surfaces to avoid rear wheel spin. Do
not continue to ride for longer than is
necessary with the Engine Management
System Malfunction Indicator Light (MIL)
and traction control warning lights
illuminated.
Triumph dealer as soon as possible to
have the fault checked.
Hard acceleration and cornering in this
situation may cause the rear wheel to
spin resulting in loss of motorcycle
control and an accident.
the
traction
Warning
Contact
an
authorized
control
31
Advertisement
Chapters
Table of Contents
