Rear Brake Pads - Triumph 2012 Tiger 800 Service Manual

Rear Brake Pads

Before starting work, ensure the motorcycle is stabilised
and adequately supported. This will help prevent it from
falling and causing injury to the operator or damage to
the motorcycle.
1. Push the brake caliper inwards towards the wheel in
order to displace the caliper piston.
2. Remove the plug protecting the pad retaining pin.
1. Plug
2. Pad retaining pin
Note:
•
Before removing the brake pads, note the
relationship of the pads to the caliper and
ensure that, on assembly, they are fitted in
the same way.
Do not allow the caliper to hang on the brake hoses as
this may damage the hoses and could lead to loss of
motorcycle control and an accident.
Service Manual Tiger 800 and Tiger 800XC
-
3 . Remove the brake caliper bolts a n d raise the caliper.
1. Brake caliper bolt
2. Brake pads
3. Pad retaining pin
4. Remove the pad retaining pin and remove the pads.
5. Remove the anti-rattle spring and inspect for
damage.
1. Anti-rattle spring
B rakes
14.25