Front Wheel Pulser Gear Missing Teeth - Triumph 2012 Tiger 800 Service Manual

Brakes

Front Wheel Pulser Gear Missing Teeth

Fault Code
C 1 6 21
Pinpoint Tests
Test
1 Measure the air gap of the front wheel
speed sensor between the sensor and the
pu lser ring:
- Ai r gap between 0.1 m m to 1 . 5 m m
2 Check the pulser ring
contamination by road grime or ferrous
metal fi lings
3 Check the wheel speed sensors for correct O K
instal lation,
and the
torque:
4 Check the motorcycle wheel for damage/
incorrect size
5 Clear fa ult code and test ABS to verify fa ult
clea red
14.64
Possible cause
I n correct Wheel speed sensor air gap
Damaged or d irty pulser ring
Loose or incorrectly installed wheel
speed sensor
Damaged/incorrect wheels
Result
O K
Fau lty
for damage or OK
Fau lty
fixings for correct
Fa u lty
O K
Faulty
OK
Fau lt still present
SeiVice Manual
-
Action
Ensure ABS ECM con nector is secu re.
Proceed to pinpoint test 1 :-
Action
Proceed t o test 2
Rectify the fa ult a n d proceed to test 5
Proceed to test 3
Clean or replace the ABS pulser ring, proceed
to test 5
Proceed t o test 4
Rectify the fault a n d proceed to test 5
Proceed t o test 4
Rectify the fault a n d proceed to test 5
Actio nJcom plete - q uit test
Contact Tri u m p h service
Tiger 800 and Tiger 800XC