Abs Hydraulic Modulator/Ecm; Removal - Triumph Thunderbird Service Manual

ABS Hydraulic Modulator/ECM
Removal
1.
Remove the rider's seat (see page 17-8>.
2. Disconnect the battery, negative (black) lead first.
3. Remove the exhaust system (see page 10-86>.
To prevent body damage, do not spill brake fluid onto
any area of the bodywork or wheels.
4. Drain the fluid from the front master cylinder, attach
a tube to the right hand caliper bleed nipple, slacken
the nipple and allow the fluid to drain into a suitable
container. Operate the brake lever until all fluid has
been expelled (see page 12-9).
S. Drain the fluid from the rear master cylinder by
bleeding the system at the rear caliper until all fluid
has been expelled (see page 12-27).
6. Disconnect the rear brake hose at the rear caliper.
Discard the sealing washers.
o
o
0
1. Rear brake hose
2. Union
7. Remove the fixing and detach the brake hose P-c1ip
from the left hand side of the swinging arm.
1. Brake hose
2. Clip
3. Fixing
8. Reposition the rubber boot and disconnect the brake
light switch.
9. Remove the fixing and detach the brake light switch
boss from the crankcase.
elyu
1. Brake light switch boss
2. Fixing
10. Noting their positions and orientation, disconnect the
two front brake hoses at the union under the front of
the engine. Discard the sealing washers.
12.34
SelVice Manual- Thunderbird