Triumph 2012 Tiger 800 Service Manual page 266

Fuel System/Engine Management
Rear Wheel Unit Sensor Loss of Com munication
Note:
•
Refer to the owner's handbook for the wheel pressure sensors ID numbers.
Fault Code
L0006
10.88
Possible cause
lmmobiliser!TPMS control module
has lost communication with the rear
wheel sensor unit.
Low battery voltage.
Wrong sensor I D number has been
registered in the immobiliser!TPMS
control module
Service Manual Tiger 800 and Tiger 800XC
-
Action
If the problem persists:
Using the Triumph diagnostic tool,
check that the correct I D number for
the rea r wheel pressure sensor is
registered to the lmmobiliser!TPMS
control module.
Replace the rear wheel pressure
sensor following the procedure
described in the Triumph d iagnostic
tool user guide.
Record the new sensor's I D number
into the owner handbook before
fitting.