Triumph 2012 Tiger 800 Service Manual page 265

Front Wheel Unit Sensor Loss of Communication
Note:
•
Refer to the owner's handbook for the wheel pressure sensors ID numbers .
Fault Code
LOOOS
Possible cause
lmmobiliser/TPMS control module
has lost communication with the front
wheel sensor unit.
Low battery voltage.
Wrong sensor ID number has been
registered in the immobiliser/TPMS
control module
SeiVice Manual Tiger 800 and Tiger 800XC
-
Fuel System/Engine Management
Action
If the problem persists:
Using the Triumph diagnostic tool,
check that the correct I D number for
the front wheel pressure sensor is
registered to the l m mobiliser/TPMS
control module.
Replace the front wheel pressure
sensor fol lowing the procedure
described in the Triumph diagnostic
tool user gu ide.
Record the new sensor's ID n umber
into the owner handbook before
fitting.
10.87