Triumph 2012 Tiger 800 Service Manual page 151

6.
Refit the alternator rotor <see page
Z Lubricate the idler gear shaft with a 50/50 solution
of engine oil and molybdenum disulphide grease.
8. Fit the starter idler gear and shaft to the crankcase.
1. Idler gear
2. Idler shaft
9. Thoroughly clean the left hand engine cover.
10.
Position a new gasket to the crankcase dowels then
refit the left hand engine cover.
17-20>.
SeNice Manual Tiger 800 and Tiger 800XC
-
1 1. Refit the bottom hose bracket to the front two bolts.
I nstall the cover bolts, using new 3 5 mm bolts as
noted during removal (the 2 5 mm bolts may be re­
used). Tighten the 2 5 m m fixings to
9
35 mm fixings to
Nm.
1. Left hand engine cover
2. Coolant hose bracket
1 2 . Reconnect the battery, positive <red) lead first.
1 3 .
Refit the rider's seat (see page
Transmission
and the
8 Nm,
16-13).
7.23