Triumph 2012 Tiger 800 Service Manual page 103

Z Lock the inner and outer drums together using
service tool T3 8803 06. Depress the rear brake pedal
to prevent the engine from turning, and tighten the
98
clutch centre nut to
tool.
8. Using a suitable pin punch, stake the nut to the shaft.
1. Service tool T3880306
9.
Disengage second gear and check for free
rotation of the clutch in ner drum.
10. Coat all clutch friction plates in clean engine oil
before fitting the friction
anti-judder spring and anti-judder seat washer to the
clutch basket in the same order and orientation as
noted during removal.
Note:
The inner and outermost friction plates are
•
different to the remainder and are also
different to each other. They must be fitted
t
in their no ed positions.
Remove the service
Nm.
plates, steel plates,
SeiVice Manual Tiger 800 and Tiger 800XC
-
The three outer
•
different to the other plates, depending on
the clutch pack height settings used during
manufacture <see page
fitted in their noted positions.
1. Steel plate
2. Inner fiction plate
3. Anti-judder spring
4. Anti-judder seat washer
5. Clutch inner drum
Clutch
steel plates may be
4-8).
They must be
4.11