Drive Shaft Assembly - Xerox Phaser 6600 Service Manual

Waste Drive Assembly
PL3.1.2
WARNING: The Fuser is very hot. Take added care when handling the fuser to avoid being burned.
1. Remove the Right Cover Assembly. (page 4-131)
2. Release the harness from the clamp installed on the Waste Drive Assembly.
3. Remove two screws (silver, tapping, 8mm) and one screw (silver, 6mm) that attaches the Waste
Drive Assembly to the printer and remove the Waste Drive Assembly.

Drive Shaft Assembly

PL3.1.8
WARNING: The Fuser is very hot. Take added care when handling the fuser to avoid being burned.
1. Remove the Drive Assembly.
2. Remove the Duplex Chute Assembly Kit. (page 4-84)
Xerox Internal Use Only
(SFP page 4-11; MFP page 4-16)
Service Parts Disassembly
s6600-107
Phaser 6600 and WorkCentre 6605
Service Manual
4-21