Ricoh FT5535 Service Manual page 85

Mode No.
•
°6-002 ADF Free Size
Setting †
°6-003 Auto Sort
Selection †
°6-005 Blank Copy for
Last Odd
Originals in
Duplex †
6-006-001 DF Registration
to Adjustment †
6-006-002
6-009 DF Free Run
with Paper
•
°6-010 Auto APS
Select (DF) †
•
°6-011 Thick/Thin
Original Mode
Selection †
FT5535/4527/4522
Function
Specifies whether ADF free size setting is on
or off.
Switch this on if the user makes copies of
originals that contain paper of different sizes.
Advise users that skew may occur if the
papers are of different widths, so for example,
put the A4 pages sideways if accompanied by
A3 pages.
If this feature is switched on, the copying
speed will be reduced.
Specifies whether auto sort mode is on or off.
In auto sort mode, when two or more originals
are placed on the ADF, sort mode is selected
if the copy quantity is between 2 and 20.
Specifies whether a blank copy is added after
the last page for an odd number of originals in
duplex mode.
In SADF or platen mode, the last page always
stays in the duplex unit, regardless of this
setting.
Adjusts the registration of the document
feeder.
SP6-006-001: One-sided original
SP6-006-002: Two-sided original
(0.3 mm per step [Range: –4.8 mm to +4.8
mm])
See "Vertical Registration" in the ARDF
manual for details on how to use these
adjustments.
To start the DF free run, put some sheets of
paper on the ARDF then press the "Start" key.
Stop the free run by pressing "Clear/Stop".
This is a general free run controlled from the
copier. For more detailed free run modes, see
the manual for the DF.
Selects whether auto APS mode is used with
the DF or not.
If "ON" is selected, APS mode is selected
automatically when an original is placed on
the DF. This SP mode is in effect only when
the APS priority (SP5-003) is set to Manual.
Selects the original feed type for the DF.
In thin mode, originals will not be pushed back
against the left scale.
4-34
Settings
0: OFF
1: ON
0: OFF
1: ON
0: Not added
(the last page
stays in the
duplex unit)
1: Added
0 ~ 32
Default = 16
0: OFF
1: ON
0: Thick mode
1: Thin mode
FSM