Ricoh FT5535 Service Manual page 603

PREVENTIVE MAINTENANCE SCHEDULE
11. Exterior
(every 120 k)
12. Development Unit
(every 120 k)
13. Make a Copy
A207/A208/A211
1. Clean the covers.
Perform the following SP Modes in the following
order.
1. SP2-214 TD Sensor Initial Setting
2. SP3-001 ID Sensor Initial Setting
3. SP3-112 Forced V
4. * SP4-001 Exposure Lamp Voltage Adj.
5. SP4-201 Auto ADS Gain Adj.
6. * SP3-105 Forced V
*: Perform these SP modes only if the exposure
lamp has been replaced.
Make a copy of an OS-A3 test chart at manual
image density level 4.
1-100
Detection
R
Detection
L
SM