Ricoh FT5535 Service Manual page 566

Mode No.
°5-408 Number of Registered User Codes Display †
•
°5-410 User Code Reset Time Setting †
°5-501-001 PM Interval Setting †
°5-501-002 PM Interval Setting (PM Alarm Mode Setting) †
5-504 Used in Japan only. Do not change the factory setting.
5-505 Used in Japan only. Do not change the factory setting.
°5-507 Used in Japan only. Do not change the factory setting.
5-801 Memory All Clear †
5-802-xxx Free Run Mode
5-803 Input Check Mode †
5-804 Output Check Mode
°5-810 SC Reset †
5-811 Used in Japan only. Do not change the factory setting.
°5-812 Telephone Number Input † (A207 copier only)
°5-816 Used in Japan only. Do not change the factory setting.
5-817 Used in Japan only. Do not change the factory setting.
°5-905 APS A4/LT Sideways Priority †
•
°5-906 Manual Staple Reset Time Setting †
•
°5-907 Cover Mode Selection †
•
°5-908 Image Shift/Erase Selection †
•
°5-909 10 key Zoom/Size Magnification †
•
°5-910 Guidance Language Setting † (A207 copier only)
Peripherals
•
°6-001 SADF Auto Reset Time Setting †
°6-003 Auto Sort Selection †
°6-005 Blank Copy for Last Odd Originals in Duplex †
6-006-xxx DF Registration Adjustment †
6-009 DF Free Run with Paper
•
°6-010 Auto APS Select (DF) †
•
°6-011 Thick/Thin Original Mode Selection †
°6-101 Sorter Installation †
°6-102 Sorter Stack Limit †
°6-104 Staple Sheet Limit †
6-105-xxx Staple Position Adjustment †
6-107 Sorter Free Run Mode
Counters
°7-001 Total Operation Time Display †
°7-002 Total Original Counter Display †
Copy Charge Counter for RDS/CSS Display †
This is for use with features that are available only in Japan.
°7-003
However, it does show how many originals have been copied (total
of DF mode + platen mode).
SM
SERVICE PROGRAM MODE
Function
1-63 A207/A208/A211