Ricoh FT5535 Service Manual page 518

ELECTRICAL COMPONENT DESCRIPTIONS
Symbol Name
Transfer Belt Contact
CL3
CL4 Registration
By-pass Feed
CL5
CL6 Relay
Upper Paper Feed
CL7 (Non-duplex machines
only)
CL8 Lower Paper Feed
Solenoids
LCT machines:
LCT/By-Pass Pick-up
Solenoid
SOL1
Non-LCT machines:
By-pass Pick-up
Solenoid
Junction Gate
SOL2
(Duplex machines only)
LCT Pick-up
SOL3
(LCT machines only)
Upper Tray Pick-up
(
(Non-duplex machines
SOL4
only)
Lower Tray Pick-up
(
SOL5
Upper Tray Separation
(Non-duplex machines
(
SOL6 only)
Lower Tray Separation
(
SOL7
Lamps
Exposure
(
L1
SM
Function
Controls the touch and release movement
of both the transfer belt unit and the drum
charge roller unit.
Drives the registration rollers.
Starts paper feed from the by-pass feed
table or LCT.
Drives the relay rollers.
Starts paper feed from the upper paper
tray.
Starts paper feed from the lower paper tray.
Picks paper up from the by-pass feed
table. When paper is fed from the LCT, this
solenoid assists SOL3.
Moves the junction gate to direct copies to
the duplex tray or to the paper exit.
Picks up paper from the LCT.
Controls the up/down movement of the
pick-up roller in the upper paper tray.
(
A208/210/211 have the components
needed for an FRR mechanism.
Controls the up/down movement of the
pick-up roller in the lower paper tray.
(
A208/210/211 have the components
needed for an FRR mechanism.
Controls the up-down movement of the
separation roller in the upper paper tray
feed station.
(
A208/210/211 have the components
needed for an FRR mechanism.
Controls the up-down movement of the
separation roller in the lower paper tray
feed station.
(
A208/210/211 have the components
needed for an FRR mechanism.
Applies high intensity light to the original for
exposure.
(
Modified - see the "Optics" section for
details.
1-15
Index No.
91
70
71
73
81
82
72
89
96
77
79
78
80
16
A207/A208/A211