Ricoh FT5535 Service Manual page 40

4. Select the required SP setting with the numeric keys (see Service Tables -
Paper Size Settings), then press the "Enter" key.
NOTE: If you input the wrong setting by mistake, you can cancel it by
pressing the "Clear/Stop" key before pressing the "Enter" key.
5. Leave SP mode by pressing the "Clear Modes" key three times.
2.3.4 Special Paper Size Selection for the 1st Tray
For the 1st tray, a wider range of paper sizes can be selected using SP5-019-007
for A153, A156, A157 and A160 copiers, or SP5-019-008 for A155 and A159
copiers.
NOTE: The definition of the 1st tray differs with the type of copier. See section
2.3.1 "Paper Feed Station Definition".
If a special paper size is selected, the machine ignores the paper size set with
the paper size slider.
See Service Tables - Paper Size Settings for how to select a special paper size
using SP5-019.
FT5535/4527/4522 3-16 FSM