Ricoh FT5535 Service Manual page 410

CUSTOMER SERVICE GROUP
BULLETIN NUMBER:
APPLICABLE MODEL: FT5035/5535/4027/4527/4022/4522
SUBJECT: PARTS CATALOG UPDATES
GENERAL:
The following Parts Updates are being issued for all FT4027/4527/5035/5535/4022/4522 Parts Catalogs.
This information should be incorporated into all existing Parts Catalog documentation.
• •
UPDATE NO. 1 -
OLD NEW
PART PART
NUMBER NUMBER
AC042112 AC042113 Left Original Scale - A4
AC042116 AC042117 Left Original Scale - LT
A1531750 A1531749 Scale Bracket
* DENOTES NEW ITEM
UNITS AFFECTED
The Left Original Scale and Scale Bracket were cut into production with the following Serial Numbers :
• FT5035/5535 - A362508XXXX / A3695070016
• FT4027/4527 - A363508XXXX / A371508XXXX
• FT4022/4522 - A364508XXXX / A372508XXXX
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured aft er the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
TECHNICAL SERVICE BULLETIN
4027/4527/5035/5535/4022/4522 - 014
LEFT ORIGINAL SCALE - To prevent the left original scale from warping, a metal
plate has been added to the new scale. The scale bracket, which was missing in
the parts catalog, has also been changed.
DESCRIPTION
FT5535/5035 FT4027/4527/
QTY INT
PAGE
1 → 1
1 9
1 → 1
3/S 9
1 → 1
3/S 9
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
02/21/96
REFERENCE
MODEL
4522/4022
ITEM PAGE ITEM
19 9 20
19 9 20
30* 9 31*
Continued...