Ricoh FT5535 Service Manual page 458

CUSTOMER SERVICE GROUP
BULLETIN NUMBER:
APPLICABLE MODEL: FT5035/5535/4027/4527/4022/4522
SUBJECT: PARTS CATALOG UPDATES
GENERAL:
The following Parts Updates are being issued for all FT5035/5535/4027/4527/4022/4522 Parts Catalogs.
This information should be incorporated into all existing Parts Catalog documentation.
• •
UPDATE NO. 1 -
R=0.5
NOTE: If the hooks of the guide plate break off, the guide plate moves up a little and sometimes causes a
paper misfeed.
OLD NEW
PART PART
NUMBER NUMBER
A1533898 A1533899
UNITS AFFECTED:
All FT5035/5535/4027/4527/4022/4522 copiers manufactured after Serial Number A3626080001,
A3696080001, A3636870121, A3716860084, A3646860046 and A3726860134 respectively will have the
new style Entrance Guide Plate installed during production.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured aft er the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
TECHNICAL SERVICE BULLETIN
4027/4527/5035/5535/4022/4522 - 027
ENTRANCE GUIDE PLATE - The hook portion of the Entrance Guide Plate has
been strengthen to prevent the hooks from being broken during removal and/or
installation.
OLD
The R (Arc) has been increased as shown.
DESCRIPTION
Entrance Guide Plate
NEW
R=1
FT5535/5035 FT4027/4527/
QTY INT
PAGE
1 → 1
1 45
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
12/03/96
REFERENCE
MODEL
4522/4022
ITEM PAGE ITEM
30 43 31
Continued...