Ft5535/4527/4522 - Ricoh FT5535 Service Manual

[C]
⇒
Fiber Connector Plug [P]
[G]
3. Open the sorter top cover [A], and remove the front cover [B] (2 screws) and
the rear cover [C] (4 screws).
4. Remove the two plastic caps [D] from the copier left cover with nippers.
5. Mount the sorter on the copier (insert the two mounting studs [E] into the
docking holes [F]).
6. Attach the sorter to the copier with the two knob screws [G].
NOTE: Tighten these knob screws until they stop halfway. Do not tighten
them forcibly after they stop.
7. Remount the sorter front cover [B] (2 screws) and the rear cover [C] (4
screws) and close the sorter top cover [A].
⇒
8. Remove the Plug [P] from the rear of the copier.
9. Connect the connector [H] to the socket [I] on the rear cover of the copier.
FSM
[A]
[B]
[I]
[H]
12-7
[D]
[F]
[E]
Rev. 10/11/95
[E]
[F]

FT5535/4527/4522