Ricoh FT5535 Service Manual page 586

Mode No.
Staple Sheet
Limit †
°6-104
Staple
Position
Adjustment
(for the A664
only) †
6-105-001
to
6-105-002
Sorter Free
Run Mode
6-107
Total Operation
Time Display †
°7-001
Total Original
Counter Display
°7-002 †
Copy Charge Counter for RDS/CSS Display †
This is for use with features that are available only in Japan. However, it
does show how many originals have been copied (total of DF mode + platen
°7-003 mode).
The 4th ~ 6th digits are displayed in the reduce/enlarge indicator. Hold down
the "0" key to display the 7th digit, and hold down the "
3rd ~ 1st digits.
SM
Function
Select whether there is a stapling limit for
the sorter stapler.
OFF: Copies of up to 25 pages can be stapled for all paper
sizes.
ON: The staple indicator will go out after the following limit
number of pages has been stacked and stapling will
not be done even if the user selects stapling mode.
A664 Sorter/Stapler
50 (A4-B5/LT, A3-B4/DLT-LG)
A658 Sorter/Stapler:
20 (A4 - B5/LT, A3 - B4 / DLT - LG)
A555 Sorter/Stapler:
20 (A4 - B5/LT, A3 - B4 / DLT - LG)
Adjusts the staple position.
SP6-105-001: Vertical staple position
SP6-105-002: Horizontal staple position
A204M500.wmf

Start the sorter free run by pressing the
key. Stop it by pressing the
This is a general free run controlled from
the copier. For more detailed free run
modes, see the sorter manuals.
Displays the total operation time (hours).
The first three digits are displayed in the
reduce/enlarge indicator. Hold down the
" " key to display the last three digits.
•
Displays the total number of scanned
originals (DF + platen).
The first three digits are displayed in the
reduce/enlarge indicator. Hold down the
" " key to display the last three digits.
•
1-83
SERVICE PROGRAM MODE
Settings
0: OFF
1: ON
0 ~ 14
{
Default = 7
|
(0.5 mm per
step)

key.
" key to display the
•
A207/A208/A211