Ricoh FT5535 Service Manual page 64

4. Refer to the "SP MODE FACTORY SETTING DATA" sheet located in the
upper inner cover and enter the data that were stored in the following SP
modes at the factory.
•
SP1-001: Registration Adjustment
•
SP2-001: Drum Charge Roller Voltage (for Copying)
•
SP2-003: Drum Charge Roller Voltage (for V
•
SP2-101-001: Lead Edge Erase Margin
•
SP4-001: Exposure Lamp Voltage Adjustment
•
SP4-008: Vertical Magnification Adjustment
•
SP4-011-008: Base Horizontal H.P. Adjustment
•
SP4-101: Horizontal Magnification Adjustment
•
SP4-102: Lens Error Correction
•
SP4-103: Focus Adjustment
5. Perform the following SP modes in the following order (see "Practical SP
Mode Use Tables" for details):
(1) SP2-214: TD Sensor Initial Setting
(2) SP3-123: Drum Initialization
(3) SP3-001: ID Sensor Initial Setting
(4) SP3-112: Forced V
(5) SP4-001: Exposure Lamp Voltage Adjustment
(6) SP4-201: Auto ADS Gain Adjustment
(7) SP3-105: Forced V
6. Check the copy quality and the paper path and do any necessary
adjustments (see Replacement and Adjustment - Copy Quality Adjustments).
FSM
SP
Detection
R
Detection
L
4-13
Pattern)
FT5535/4527/4522