Ricoh FT5535 Service Manual page 583

SERVICE PROGRAM MODE
Mode No.
Free Run Mode Performs the free run
5-802-001
to
5-802-002
Input Check
5-803 Mode †
Output Check
5-804 Mode
SC Reset †
°5-810
Machine Serial No. Input †
5-811
For use with features that are available in Japan only
Telephone
Number Input †
(A207 copier
°5-812 only)
RDS/CSS Function Setting †
°5-816
For use in Japan only. Do not change the factory setting.
Repair Time Transmission †
5-817
For use in Japan only. Do not change the factory setting.
APS A4/LT
Sideways
Priority †
°5-905
Manual Staple
Reset Time
Setting †
•
°5-906
A207/A208/A211
Function
SP5-802-001: Continuous free run
SP5-802-002: One time free run


Before starting, close the platen or
ARDF. Press the key to start the
free run. Press the key to stop the
free run.
Displays the data received from sensors
and switches.
Turns on the electrical components
individually for test purposes.
Resets any service call condition that
was caused by a level A error (see the
Troubleshooting section).
After doing SP5-810, turn the copier
main switch off and on.
Use this to input the telephone number
of the service representative (this is
displayed when a service call condition
occurs.) Maximum 16 digits. Press the "
key to input a pause (–).
Press the key to delete the input
telephone number.
Specifies whether the machine selects
LT sideways paper if the original is A4.
If "ON" is selected, LT sideways copy
paper is selected automatically when the
APS sensors detect an A4 sideways
original. This feature does not work in
reverse (A4 sideways paper is not
selected for an LT sideways original).
Sets the manual staple reset time.
(1 second per step [Range: 1 to 999])
After the end of a copy job in sort mode,
manual staple mode is reset
automatically when the manual staple
reset time has passed.
1-80
Settings
For details, see
Service Tables
section 2.5.
For details, see
Service Tables
- section 2.6.
"
•
0: OFF
1: ON
1 ~ 999
Default = 20 s
SM