CUSTOMER SERVICE GROUP
BULLETIN NUMBER:
APPLICABLE MODEL: FT4027/4527/5035/5535/4022/4522
SUBJECT: PARTS CATALOG UPDATES
GENERAL:
The following Parts Updates are being issued for all FT5535/5035/4527/4027/4522/4022 Parts Catalogs.
This information should be incorporated into all existing FT5535/5035/4527/4027/4522/4022 Parts Catalog
documentation.
• •
UPDATE NO. 1 -
Hinge Stopper
Spring Plate
OLD PART NO. NEW PART NO.
A1531377
A1531378
A0531957
* DENOTES NEW ITEM
UNITS AFFECTED:
Not available at time of publication.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured after the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
TECHNICAL SERVICE BULLETIN
4027/4527/5035/5535/4022/4522 - 007
FLEX HINGE PLATEN COVER - To strengthen the Hinge Stopper and the Spring
Plate of the Platen Cover, these two parts have been combined as the Flex
Hinge Platen Cover as shown below.
DESCRIPTION
Hinge Stopper
Spring Plate
Flex Hinge Platen Cover
Hinge Stopper
Spring Plate
Flex Hinge Platen Cover
QTY
INT
2
0
2
0
0
2
1
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
10/11/95
REFERENCE
PAGE
ITEM
11
6
11
5
11
13 *
Continued...