Ricoh FT5535 Service Manual page 641

STAPLER UNIT
11.3 STAPLER UNIT PULL-OUT MECHANISM
[C]
[B]
[D]
[A]
A664D525.wmf
For easy staple cartridge replenishment, the stapler unit can be pulled out to
the front. When pulling out the R3 release grip [A] , the stopper is released
and the staple unit can be pulled out (to the "staple unit pulled-out" position).
At this position, the stopper arm [B] locks the stapler unit by dropping the arm
to the edge of bracket [C].
When the stapler unit is not pushed in completely (the staple unit is between
the stapler unit home position and stapler unit pulled-out position [D]), a
message is displayed advising the user to put the staple unit in the home
position.
SM 3-23 A207/A208/A211