Ricoh FT5535 Service Manual page 114

1. Clean the covers.
11. Exterior (every 100
or 120 k)
Perform the following SP Modes in the following
order.
12. Copy Process SP
Mode Settings
1. SP2-214 TD Sensor Initial Setting
2. SP3-001 ID Sensor Initial Setting
3. SP3-112 Forced V Detection
R
4. * SP4-001 Exposure Lamp Voltage Adj.
5. SP4-201 Auto ADS Gain Adj.
6. * SP3-105 Forced V Detection
L
*: Perform these SP modes only if the exposure
lamp has been replaced.
Make a copy of an OS-A3 test chart at manual
13. Make a Copy
image density level 4.
FSM 4-63 FT5535/4527/4522