Ricoh FT5535 Service Manual page 419

CUSTOMER SERVICE GROUP
BULLETIN NUMBER:
APPLICABLE MODEL: FT4027/4527/5035/5535/4022/4522
SUBJECT: PARTS CATALOG UPDATES
GENERAL:
The following Parts Updates are being issued for all FT4027/4527/5035/5535/4022/4522 Parts Catalogs.
This information should be incorporated into all existing Parts Catalog documentation.
• •
UPDATE NO. 1 -
OLD NEW
PART PART
NUMBER NUMBER
A1344253
A1344254 Fusing Exit Guide - Rear
A1344255 Fusing Exit Guide - Front
UNITS AFFECTED
The Front and Rear Fusing Guides were cut into production with the following Serial Numbers:
• FT5035/5535 - A362509XXXX / A3695080001
• FT4027/4527 - A3635900175 / A3715890431
• FT4022/4522 - A3645890461 / A3725890263
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured aft er the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
TECHNICAL SERVICE BULLETIN
4027/4527/5035/5535/4022/4522 - 015 REISSUE
FUSING EXIT GUIDE - To prevent
paper jams, the Fusing Exit Guide
has been divided into two parts,
the Front and Rear Fusing Exit
Guides. The new Fusing Exit
Guides are positioned as shown.
DESCRIPTION
Fusing Exit Guide
A
A: 0 ~ 1 mm
B
B: 0 ~ 0.5 mm
FT5535/5035 FT4027/4527/
QTY
PAGE
1 → 0
49
0 → 1
49
0 → 1
49
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
10/15/96
New Fusing Exit Guides
A
B
REFERENCE
MODEL
4522/4022
ITEM PAGE ITEM
14 47 14
14 47 14
14 47 14
Continued...