Ft5535/4527/4522 - Ricoh FT5535 Service Manual

6. ROLLER DRIVE BELT REPLACEMENT
[L]
[K]
[M]
[N]
1. Remove the front cover [A] (1 screw).
2. Remove the rear cover [B] (1 screw) and the sorter hinge [C] (2 screws).
3. Remove the rear flat cover [D] (2 screws).
4. Lift off the top cover [E].
5. Lift the upper paper guide [F] up and out of position (1 grounding wire).
6. Remove the entrance guide bracket [G] (2 screws).
7. Lift the lower paper guide [H] out of position and turn it over to remove the
roller drive belt [I].
NOTE: Be careful not to damage the bin home position switch actuator [J]
when reassembling.
8. Remove the transfer spacer [K], wheel [L], pin [M], and bushing [N] on both
sides of the shaft.
9. Slide the wheel shaft towards the front and replace the roller drive belt.
FSM
[F]
[H]
[D]
[I]
13-9
[E]
[J]
[C]
[B]

FT5535/4527/4522

[G]
[A]