Ricoh FT5535 Service Manual page 629

[Fig. 4]
The grip assembly brings the stapled copies back to the bin and the bin rear
plate returns to the original position.
The grip assembly releases the copies and returns to outside the front side
plate so as not to disturb the bin movement [Fig. 4].
The bin advances one step [Fig. 5].
When the final set of copies is stapled, the stapler unit is returned to the
home position.
There are two staple modes.
1) Automatic stapling:
In ADF mode, when staple mode is selected before pressing the
copies will be delivered to each bin and stapled automatically.
2) Manual stapling:
In sort mode, after copies are sorted in the bins, the copies will be stapled
when the manual staple key is pressed and the staple position is
selected. In stack mode, manual stapling is impossible.
SM
A664D505.img
[Fig. 5]
3-11
BASIC OPERATION
A664D506.img
key,
A207/A208/A211