Ricoh FT5535 Service Manual page 477

CUSTOMER SERVICE GROUP
BULLETIN NUMBER:
APPLICABLE MODEL: FT5035/5535/4027/4527/4022/4522
SUBJECT: PARTS CATALOG CORRECTION
GENERAL:
Correct the Part Descriptions as shown below. This information should be incorporated into all exist ing
FT5035/5535/4027/4527/4022/4522 Parts Catalog documentation.
FT5035/5535
PART NO. INCORRECT DESCRIPTION
A1532110 Drum Charge Roller Bracket
FT4022/4522/4027/4527
PART NO. INCORRECT DESCRIPTION
A1532110 Transfer Roller Bracket
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured aft er the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
TECHNICAL SERVICE BULLETIN
4027/4527/5035/5535/4022/4522 - 034
CORRECT DESCRIPTION
Charge Roller Assembly
CORRECT DESCRIPTION
Charge Roller Assembly
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
05/06/97
REFERENCE
PAGE ITEM
41 2
REFERENCE
PAGE ITEM
39 2