Ricoh FT5535 Service Manual page 79

Rev. 7/95
Mode No.
4-901 APS Size
Priority (for F4
size) †
•
°4-902 APS 8K/16K
Detection †
(A4 versions
only)
•
°5-001 All Indicators
ON †
•
°5-002 Feed Station
Priority
Selection †
•
°5-003 APS Priority
Selection †
•
°5-004 ADS Priority
Selection †
•
°5-013 Counter
Up/Down
Selection †
•
°5-017 Maximum Copy
Quantity †
(Copy Limit)
•
°5-019-001 Paper Size Set
to †
5-019-008
FT5535/4527/4522
Function
Selects which copy paper size the machine
selects when the APS sensors detect F4
lengthwise (8 " x 13").
1/2
Selects whether the machine can select
8K/16K copy paper based on APS sensor
readings.
If "YES" is selected, 8K/16K copy paper is
selected under the following conditions:
Size detected Selected copy paper
by APS
8K lengthwise
B4 lengthwise
(267 mm x 390 mm)
16K lengthwise
A4 lengthwise
(267 mm x 195 mm)
16K sideways
B5 sideways
(115 mm x 267 mm)
Turns on all indicators on the operation panel.
Selects the paper feed station priority.
Non duplex
Setting
machines
1 1st Tray
2 2nd Tray
3 3rd Tray
4 4th Tray
5 5th Tray
6 LCT
Specifies whether the copier defaults to APS
or manual mode when the main switch is
turned on, auto reset, or mode cleared.
Specifies whether the copier defaults to ADS
or manual ID mode when the main switch is
turned on, auto reset, or mode cleared.
Selects whether the counter counts up or
down.
Limits the maximum copy quantity that can be
entered.
Sets the paper size for each paper tray and
feed station.
4-28
0: 8
1: 8" x 13"
2: 8
0: NO
1: YES
size
1 ~ 6: Non duplex
Duplex
1 ~ 5: Duplex
machines
1st Tray
Default = 1
2nd Tray
(without LCT)
3rd Tray
Default = LCT (5
4th Tray
LCT
(with LCT)
—
1: APS
0: Manual
Also see
SP6-010.
1: ADS
0: Manual
1: Up
2: Down
1 ~ 999
Default = 999
For how to input
the settings, see
section 2.7.
Settings
" x 13"
1/2
" x 13"
1/4
machines
machines
or 6)
FSM