Ricoh FT5535 Service Manual page 651

15.4 BINS
– Removal –
[D]
[B]
1. Remove the rear cover.
2. Raise all bins to the highest position by turning on DIP SW100-1 on the
sorter main PCB, then turn off the main switch of the copier.
3. Remove the jogger plate (refer to Jogger Plate Removal), then move the
upper jogger holder [A] to the front.
4. Remove the rear cover, then remove the bottom plate to access the drive
belt. (Refer to Exterior Cover Removal.)
5. Manually rotate the helical wheel drive belt [B] and move up the top guide
[C] until the three guide pins [D] reach the top of the helical wheel as
shown.
SM
[C]
A664R508.wmf
3-33
REPLACEMENT AND ADJUSTMENT
A207/A208/A211
[A]
A664R507.wmf