CUSTOMER SERVICE GROUP
BULLETIN NUMBER:
APPLICABLE MODEL: FT4022/4522/4027/4527/5035/5535
SUBJECT: PARTS CATALOG UPDATES
GENERAL:
The following Parts Updates are being issued for all FT4022/4522/4027/4527/5035/5535 Parts Catalogs.
This information should be incorporated into all existing Parts Catalog documentation.
• •
UPDATE NO. 1 -
OLD PART NO. NEW PART NO.
AA080193
AA080219
AA145795
AA145808
UNITS AFFECTED:
All FT5035/5535 copiers manufactured after Serial Number A3626010001 and A3695090001 respectively
will have the new style parts listed above installed during production.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured aft er the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
TECHNICAL SERVICE BULLETIN
4027/4527/5035/5535/4022/4522 - 018
REAR ROLLER BUSHING & REAR SUPPORT SHAFT - The thickness of the
plastic part of both the rear roller bushing and rear support shaft has been
increased to prevent electrical leaks from the charge roller terminal. The plastic
part is illustrated below.
OLD
Rear Support Shaft
NEW
DESCRIPTION
Rear Roller Bushing
Rear Support Shaft
Charge Roller Terminal
QTY
1 → 1
1 → 1
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
06/04/96
Charge
Receptacle
Rear Roller
Plastic
:
REFERENCE
INT
PAGE
ITEM
3/S
41
5
3/S
41
12
Continued...