Ricoh FT5535 Service Manual page 77

Rev. 7/95
Mode No.
°4-002 Exposure Lamp
Voltage Display
†
4-008 Vertical
Magnification
Adjustment †
4-011-001 Lens Horizontal
to H.P.
4-011-009 Adjustment †
4-013 Scanner Free
Run
4-101 Horizontal
Magnification
Adjustment †
FT5535/4527/4522
Function
Displays the current exposure lamp voltage.
(0.5 V per step [Range: 50.0 V to 85.0 V])
For 115 V machines, the actual applied
voltage = displayed value x 1.1412.
Adjusts the magnification in the paper travel
direction.
(0.1% per step [Range: –1.6% to +1.6%])
See "Replacement and Adjustment - Copy
Quality Adjustments" for how to adjust.
Adjusts the lens horizontal home position for
each paper feed station.
(0.2 mm per step [Range: –3.2 mm to +3.2
mm])
Without
SP Number
Duplex
4-011-001 1st tray
4-011-002 2nd tray
4-011-003 3rd tray
4-011-004 4th tray
4-011-005 5th tray
4-011-006 By-pass
4-011-007 LCT
4-011-008 Base Adjustment
4-011-009 ADF
SP4-011-008 changes the home position for
all paper feed stations at the same time. It is
mainly used for making factory adjustments. If
it is shifted by a certain amount, all other
SP4-011 adjustments move by the same
amount.
See "Replacement and Adjustment - Copy
Quality Adjustments" , and "Side-to-side
Registration" in the ARDF manual for details
on how to adjust.
Starts the scanner free run.
Start the scanner free run by pressing the
"Start" key, and stop it by pressing
"Clear/Stop".
Adjusts the magnification perpendicular to the
direction of paper travel.
(0.2% per step [Range: –1.6% to +1.6%])
See "Replacement and Adjustment - Copy
Quality Adjustments" for how to adjust.
4-26
Settings
50.0 ~ 85.0 V
0 ~ 32
Default = 16 ‡
0 ~ 32
Default = 16
‡ (only 4-011-
008 is on the
data sheet)
With
Duplex
Duplex
1st tray
2nd tray
3rd tray
4th tray
By-pass
LCT
ADF
0 ~ 32
Default =16 ‡
FSM