Ricoh FT5535 Service Manual page 60

2.2 MEMORY RESET PROCEDURES
Before starting a memory reset procedure, be sure to remember the following:
For SP3-123, SP7-804, SP7-808, SP7-810, and SP7-811, be sure to check again
whether you really wish to use this SP mode before you press the
If the key is pressed after entering one of these modes,
the memory will be reset.
For example, to enter SP Mode 7-804
7 → → 8
2.2.1 Resetting Counters
To reset a counter, use any of the following SP modes.
SP7-804, SP7-810, SP7-811: Before pressing the final
that this is the SP mode that you really wish to use.
SP Mode Number
SP5-404-001 Selected User Code Counter
SP5-404-002 All User Code Counters
SP7-804 PM Counter
SP7-807-001 Total Service Call Counters
SP7-807-002 Total Copy Paper Misfeed Counters
SP7-807-003 Total Original Misfeed Counters
SP7-810 Copy Counters
SP7-811 DF Original Counter
SP7-816-001 Total sheets of paper fed from the Upper Tray
(Except for A156 and A160 copiers)
SP7-816-002 Total sheets of paper fed from the Lower Tray
SP7-816-003 Total sheets of paper fed from the 1st Tray of the
Paper Tray Unit
SP7-816-004 Total sheets of paper fed from the 2nd Tray of the
Paper Tray Unit
SP7-816-005 Total sheets of paper fed from the 3rd Tray of the
Paper Tray Unit
SP7-816-006 Total sheets of paper fed from the LCT
SP7-816-007 Total sheets of paper fed from the By-pass Feed
Table
SP7-816-008 Total Duplex Paper Feeds
FSM
4 → Check the SP Number again →
0
Counter to be Reset
4-9
key.
key, make sure
To Check the Counter
SP5-402
SP7-803
SP7-401
SP7-402
SP7-502
SP7-504
SP7-503
SP7-505
SP7-002
SP7-101
SP7-301
SP7-205
SP7-204-001
SP7-204-002
SP7-204-003
SP7-204-004
SP7-204-005
SP7-204-006
SP7-204-007
SP7-204-008
FT5535/4527/4522