Ricoh FT5535 Service Manual page 475

CUSTOMER SERVICE GROUP
BULLETIN NUMBER:
APPLICABLE MODEL: FT5035/5535/4027/4527/4022/4522
SUBJECT: PARTS CATALOG UPDATES
GENERAL:
The following Parts Updates are being issued for all FT5035/5535/4027/4527/4022/4522 Parts Catalogs.
This information should be incorporated into all existing Parts Catalog documentation.
• •
UPDATE NO. 1 -
OLD PART
NUMBER
AA151998
UNITS AFFECTED:
All FT5035/5535/4027/4527/4022/4522 copiers manufactured after Serial Number A3626080001,
A3696080001, A3636870121, A3716870214, A3646870176 and A3726860458 respectively will not have the
Cushion - 10 x 30 x 5 installed during production.
INTERCHANGEABILITY CHART:
OLD and NEW parts can be used in both OLD and
0
NEW machines.
NEW parts can be used in OLD and NEW machines.
1
OLD parts CAN NOT be used in NEW machines.
Must be installed as a set on units manufactured prior to the S/N cut-in. On units manufactured aft er the S/N cut-in or
3/S
previously modified, use the new part numbers individually.
TECHNICAL SERVICE BULLETIN
4027/4527/5035/5535/4022/4522 - 033
BY-PASS FEED TABLE - Ribs have been added on the By-pass Feed Cover
(A134 2746) and the Front Fence Rack (A134 2707) to prevent the Paper Size
Sensor Board from being deformed. The part numbers of the By-pass Feed
Cover and the Front Fence Rack have not been changed. Also, the Cushion -
10 x 30 x 5 (AA151998) has been removed with this modification.
DESCRIPTION
Cushion - 10 x 30 x 5
FT5535/5035 FT4027/4527/
QTY
PAGE
1 0 13
NEW parts CAN NOT be used in OLD machines.
2
OLD parts can be used in OLD and NEW machines.
OLD parts CAN NOT be used in NEW machines.
3
NEW parts CAN NOT be used in OLD machines.
02/28/97
REFERENCE
MODEL
4522/4022
ITEM PAGE ITEM
28 13 13
Continued...