Ft5535/4527/4522 - Ricoh FT5535 Service Manual

[B]
⇒
Fiber Connector Plug [P]
5. Install the sorter stapler [A] on the frame [1 M4 x 8 screw].
NOTE: Do not lift the sorter stapler by holding the entrance guide [B] when
installing it.
6. Tighten 1 M4 x 8 screw [C].
NOTE: This screw prevents the sorter stapler from falling down.
⇒
7. Remove the Plug [P] from the rear of the copier.
8. Connect the cable [D] and the optic cable [E].
9. Install the chain [F] as shown.
10. Attach the misfeed removal decal [G] and the staple position decal [H] as
shown above.
FSM
-- Incorrect Lifting Method --
[G]
[A]
[E]
[D]
11-9
[H]
[C]
[F]

FT5535/4527/4522

Rev. 10/11/95