Ricoh FT5535 Service Manual page 65

2.3 SERVICE PROGRAM MODE TABLE
1. A "†" after the mode name means that copies can be made while in this SP
mode.
2. A "‡" after the default setting in the "Settings" column means that the actual
factory setting for this is written on the data sheet in the front cover.
3. A "°" before the mode number means that this mode can be accessed by
sales representatives (
•
4. A " " before the mode number means that this mode can be accessed by
users using a UP mode (
Cross Reference Table".
5. In the Function column, comments (extra information) are in italics.
6. In the Settings column, the default values are printed in bold letters.
7. "RDS" means Remote Diagnostic System (not available in these models)
"CSS" means Customer Support System (only available in Japan)
8. Type 1 = A153, A155, and A156 copiers
Type 2 = A157, A159, and A160 copiers
2.3.1 Quick Reference
The following is a quick reference list of the SP Modes.
Mode No.
Paper Feed/Paper Transport/Fusing
1-001
1-003-xxx
1-008
1-103
°1-104
1-105-xxx
1-106
1-108
1-902
1-905
Around the Drum
2-001
2-002-xxx
2-003
2-101-xxx
FT5535/4527/4522
→
→
Registration †
Paper Feed Timing †
Misfeed Detection †
Fusing Idling †
Fusing Temperature Control †
Fusing Temperature Adjustments †
Fusing Temperature Display †
Forced Start †
Jogger Span Adjustment (Side Fence) †
Jogger Span Adjustment (End Fence) †
Drum Charge Voltage Adjustment (for copying)
Drum Charge Voltage Display †
Drum Charge Voltage Adjustment (for making V
Leading/Trailing Edge Erase Margin Adjustment †
4-14
→ →
). See "UP Mode/SP Mode
Function
patterns)
SP
).
FSM