Ricoh FT5535 Service Manual page 80

Mode No.
•
°5-101 Auto Reset
Time Setting †
•
°5-102 Auto Energy
⇒
Saver Time
Setting †
•
°5-103 Auto Tray Shift
†
°5-104 A3/DLT Double
Count †
•
°5-105-002 Fuser temp †
⇒
•
°5-106 Image Density
Level
Correction
(ADS
Correction) †
•
°5-107-001 Image Shift
to Margin
5-107-002 Adjustment †
•
°5-108 Edge Erase
Margin
Adjustment †
FSM
Function
Inputs the auto reset time after the copier
enters standby, or disables auto reset.
(1 second per step [Range: 1 ~ 999])
If "0" is selected, auto reset is disabled.
Sets the time that the machine enters energy
saver mode after entering the ready condition,
Selects whether auto tray shift is on or off.
Specifies whether the counter is doubled for
A3/DLT paper.
If "ON" is selected, the total counter and the
current user code counter counts up twice
when A3/DLT copy paper is used.
Fuser temperature can be selected in energy
saver mode
Selects the image density level correction.
The development bias voltage correction in
ADS mode depends on this setting (see "ADS
Correction" in the Process Control section for
details).
This controls the margin width adjustment for
the Left and Right margin adjustment keys.
SP5-107-001: Left
SP5-107-002: Right
SP5-908 must be at 2 for this to have any
effect; this changes the function of the Erase
key to a Margin Adjustment key.
(A4 version: 1 mm per step [Range: 0 mm to
15 mm],
LT version: 0.01" per step [Range: 0" to
0.60"])
Adjusts the edge erase margin width in erase
edge mode.
SP5-908 must be at 1 for this to have any
effect. A strip of the selected width will be
erased around the edges of the copy image.
4-29
Rev. 1/26/96
Settings
0 ~ 999
Default = 60
1 ~ 120 minutes
(1minute per step)
(Default: 15
minutes)
0: OFF
1: ON
0: OFF
1: ON
SP Type 1 Type 2
Data
175 ° C 175 ° C
0
160 ° C 150 ° C
1
145 ° C 125 ° C
2
130 ° C 100 ° C
3
115 ° C 75 ° C
4
95 ° C
5 -
Default
2: (145 ° C) :FT5035/5535
2: (125 ° C) :FT4027/4527
3: (100 ° C) :FT4022/4522
0: Dark
1: Normal
2: Light
A4 version
0 ~ 15
Default = 5
LT version
0 ~ 0.60
Default = 0.20
A4 version
1: 5 mm
2: 10 mm
LT version
1: 0.20"
2: 0.40"
FT5535/4527/4522