Ricoh FT5535 Service Manual page 295

[A]
[E]
15. Open the front door of the sorter stapler and swing the staple unit [A] up.
16. Remove the green plastic clip [B] from the staple cartridge [C] and correct the
position of the staple sheet [D] to make it flush with the other sheets in the
cartridge.
17. Install the cartridge in the stapler while holding the staple unit.
18. Put the staple unit back in its original position, close the sorter stapler front
door, and plug in the copier.
19. Attach the staple position decal [E] to the ARDF as shown.
20. Turn on the copier main switch and test the operation of the sorter stapler.
NOTE: The stapler will not be stapling for the first 10 or so copies until the
first staple comes to the proper position from the cartridge.
FSM
[C]
[B]
[D]
[C]
10-13 FT5535/4527/4522