Ricoh FT5535 Service Manual page 480

Tech Service Bulletin No. 4027/4527/5035/5535/4022/4522 - 036
Page 2 of 3
6. Separate the Upper and Lower Unit 3 screws [G] & 1 screw [H].
7. Remove the Paddle Roller Ass'y [I], and replace the Bushings [J] and V-rings. [K].
NOTE: Make sure that the V-ring is in the proper position as shown in the illustration.
8. Re-assemble Development Unit.
Entrance Seal Ass'y [C]
(A1533075)
Screw [D]
Seal [A]
(AA150382)
Screw [F]
Screws[G]
[I]
[J]
Seal [B]
(AA150231)
Side Bracket [E]
[H]
[J]
[K]
[K]
DO NOT LOOSEN
THESE SCREW
DO NOT
LOOSEN
THIS
SCREW
Continued...