Ricoh FT5535 Service Manual page 126

2.5 3RD SCANNER MOTOR REPLACEMENT
[A]
[F]
[G]
1. Remove the following parts:
•
Platen cover or DF
•
Left scale
•
Exposure glass
•
Top cover
•
Rear scale
2. Remove the upper right frame [A] (3 screws).
3. Remove the 1st scanner [B] from the scanner drive belt (1 screw).
4. Remove the 2nd scanner [C] from the scanner drive belt by loosening the 2
screws as shown.
5. Remove the front scanner guide rail [D] (1 spring plate).
6. Remove the 2 idle gears [E] (1 E-ring).
7. Remove the 3rd scanner motor bracket [F] (2 screws and 1 connector).
8. Replace the 3rd scanner motor [G] (2 screws).
FT5535/4527/4522
[D]
[C]
•
•
•
•
5-10
[E]
Lens cover
Operation panel
Left scale bracket
Scanner HP. sensor bracket
[B]
FSM