Ricoh FT5535 Service Manual page 398

Tech Service Bulletin No. 4027/4527/5035/5535/4022/4522 - 010
Page 4 of 6
• •
SP Mode
One new SP mode has been provided and three SP modes have been changed in the software
(ROM : A1535106A). Replace Field Service Manual pages 4-29, 4-30 and 4-33 with the replacement page s
provided with this package.
Mode No.
SP5-911 Copy mode selected when machine is turned on
(FT5535, FT4527, FT4522 copiers)
SP5-102 Auto energy saver time can be selected.
SP5-305 Auto off time can be selected.
SP5-105-002 Fusing temperature can be selected in energy
saver mode.
SP5-102 and SP5-305 can also be selected by the customer.
Please refer to pages five and six of this bulletin for the procedure.
• •
Instruction Sheet
An additional explanation sheet has been added to the operating instructions. Please make copies of the
following two pages and add them to the operating instructions for all FT5035/5535, FT4027/4527 and
FT4022/4522 copiers.
Function Settings
1 : Duplex Copy Mode (Default)
2 : Single Side Copy Mode
1 ~ 120 minutes
(1 minute per step)
Default : 15 minutes
1 ~ 120 minutes
(1 minute per step)
Default : 60 minutes
Default
2: (145°C) : FT5035/5535
2: (125°C) : FT4027/4527
3: (100°C) : FT4022/4522
Continued...